MIG/MAG Welding Torches MB ERGO
Запросить цену
MIG/MAG Welding Torches MB ERGO
MIG/MAG Welding Torches MB ERGO – The robust high-quality classic torches ...
The MIG/MAG torch series ”MB ERGO“ is available in air and liquid cooled varieties and combines progressive technology and quality, enabling trouble-free operation for every application. All torches are thoroughly designed to provide comfortable and precise operation.
Arguments speaking for themselves:
- Worldwide recognized top quality
- Ergonomically and technically advanced and 100% reliable
- Optimum cooling of the torch, extending torch life
- Time saving torch change over due to the ABICOR BINZEL central adapter system
MIG/MAG Welding Torches MB ERGO, air cooled
Technical data (EN 60 974-7):
| Type: | MB ERGO 15 AK / MB ERGO 15 AK-FX** |
MB ERGO |
MB ERGO 25 AK / MB ERGO 25 AK-FX** |
MB ERGO |
MB ERGO |
| Rating | |||||
| CO2: | 180 A | 250 A | 230 A | 230 A | 300 A |
| Mixed gases M21*: | 150 A | 220 A | 200 A | 200 A | 270 A |
| Duty cycle (%): | 60 | 35 | 60 | 35 | 60 |
| Wire Ø (mm): | 0.6 - 1.0 | 0.8 - 1.2 | 0.8 - 1.2 | 0.8 - 1.2 | 0.8 - 1.2 |
Technical data (EN 60 974-7):
| Type: | MB 40 KD | RB 61 GD |
| Rating | ||
| CO2: | 300 A | 450 A |
| Mixed gases M21*: | 270 A | - |
| Duty cycle (%): | 60 | 60 |
| Wire Ø (mm): | 0.8 - 1.2 | 1.6 - 3.2 |
* according to DIN EN 439
** without figure
Rated using power source with VDE standard volt/amp characteristic (U=14+0.05xl). When pulse welding, reduce rating by 35%.
MIG/MAG Welding Torches MB ERGO, liquid cooled
Technical data (EN 60 974-7):
| Type: | MB ERGO 240 D |
MB ERGO 401 / 401 D |
MB ERGO 501 / 501 D |
| Rating | |||
| CO2: | 300 A | 450 A | 550 A |
| Mixed gases M21*: | 270 A | 400 A | 500 A |
| Duty cycle (%): | 100 | 100 | 100 |
| Wire Ø (mm): | 0.8 - 1.2 | 0.8 - 1.2 | 1.0 - 1.6 |
Technical data (EN 60 974-7):
| Type: | MB 602 | RB 610 D |
| Rating | ||
| CO2: | 600 A | 650 A |
| Mixed gases M21*: | 550 A | - |
| Duty cycle (%): | 100 | 100 |
| Wire Ø (mm): | 1.0 - 1.6 (2.4) | 1.6 - 3.2 |
* according to DIN EN 439
Rated using power source with VDE standard volt/amp characteristic (U=14+0.05xl). When pulse welding, reduce rating by 35%. Recommended cooling capacity of water recirculator approx. 800 W. To protect cable assembly components from excessive heat build up we recommend a post welding cooling cycle of at least four minutes.